We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Hand Tap.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Hand Tap - List of Manufacturers, Suppliers, Companies and Products

Hand Tap Product List

1～11 item / All 11 items

Displayed results
Arks Hand Tap "AXE-HT"

Arks Hand Tap "AXE-HT"

Demonstrates outstanding power in the processing of aluminum alloy castings and more! Compatible with mid to high-speed ranges.

The "AXE-HT" is an Arks hand tap that achieves over five times the lifespan of conventional aluminum taps through a combination of a blade shape that minimizes blade wear, excellent wear resistance, and heat resistance with high-quality powdered high-speed steel and titanium coating. The blade shape that minimizes wear suppresses dimensional changes and surface roughness of the internal threads. With a suitable combination of negative blade shape and eccentric relief, it is compatible with medium to high-speed ranges. 【Features】 - Achieves long lifespan through a suitable combination of negative blade shape and eccentric relief - Utilizes high-quality powdered high-speed steel and titanium coating with excellent wear and heat resistance - Adaptable to a wide range of processing machines from transfer machines to machining centers - Stable tapping processing through chip fragmentation *For more details, please refer to the PDF document or feel free to contact us.

  • Tap

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
4) Hand tap

4) Hand tap

Comprehensive Catalog 2024-2025 Hand Tap Series

We would like to introduce the "Hand Tap" handled by Miman Manufacturing Co., Ltd. Starting with the "IHT," a tap for through holes and blind holes used for hand-operated screw threading and reaming, we also offer "HT" and "HT LH," which are suitable for materials that produce chips in a powdery or small curled form. We have a wide variety available, so please utilize them according to your needs. 【Lineup (Excerpt)】 ■CAST CH ■IHT ■HT ■HT LH ■LS-HT ■LS-HT LH *For more details, please refer to the PDF document or feel free to contact us.

  • 2020-06-16_14h10_34.png
  • Tap

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Understanding with Manga! Yamawa's Tool 'MG-HT' Edition

Understanding with Manga! Yamawa's Tool 'MG-HT' Edition

For tapping small precision screws! A manga explanation of the benefits of the short chamfer hand tap 'MG-HT'.

This brochure explains the benefits of the short chamfer hand tap 'MG-HT' for magnesium alloy castings in an easy-to-understand manga format. The number of threads in the engaged portion is less than one, allowing processing up to the limit of the hole depth. The blade design that reduces heat generation during processing results in a clean internal thread surface and eliminates inner diameter burrs. Additionally, it features a groove shape suitable for zinc alloy castings and aluminum alloy castings. 【Features】 ■ The number of threads in the engaged portion is less than one ■ Processing is possible up to the limit of the hole depth ■ Blade design that reduces heat generation during processing ■ Clean internal thread surface and elimination of inner diameter burrs ■ Groove shape suitable for zinc alloy castings and aluminum alloy castings *For more details, please refer to the link below or feel free to contact us.

  • Tap

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Knowledge bag for when you're in trouble: Differences between tripod and unify taps.

Knowledge bag for when you're in trouble: Differences between tripod and unify taps.

Resolving common questions and concerns about screws! Cutting tap edition.

YAMAWA will respond to inquiries from customers. This document includes detailed explanations as well. [Contents] ■Inquiry "I found a hand tap marked 'TRI 1/4-20'. What is this tap used for? Is it okay to substitute it with a Unified thread tap '1/4-20UNC'?" *For more details, please refer to the PDF document at the link below.

  • Tap

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Hand Tap for Microscope Objective Lenses "HT MST"

Hand Tap for Microscope Objective Lenses "HT MST"

Ideal for processing microscope objective screws! Introducing a tap for through holes that can also be used for re-threading.

Introducing the hand tap 'HT MST' for microscope objective lenses, handled by Yamawa Manufacturing Co., Ltd. It can be used for machining centers, hand-operated threading, and reworking. The microscope objective screw is used in the revolver part of the microscope, and generally, the screw referred to as "RMS type" with dimensions "20.32W36" is widely used. 【Features】 ■ Suitable for processing microscope objective screws ■ Through-hole tap that can be used for machining centers, hand-operated threading, and reworking *For more details, please refer to the PDF document or feel free to contact us.

  • 2021-09-10_09h42_38.png
  • 2021-09-10_09h42_57.png
  • 2021-09-10_09h43_10.png
  • Tap

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Understanding with Manga! Yamawa Tool 'Left-Hand Thread HT LH' Edition

Understanding with Manga! Yamawa Tool 'Left-Hand Thread HT LH' Edition

Explaining the benefits of "Left Thread HT LH," which is used in various ways besides preventing loosening, through a manga.

This booklet clearly explains the advantages of the hand tap series for left screws, 'HT LH', using manga. Fans use "left screws," and when counterclockwise force is applied to the cap, there is a risk that the blades may fall off if right screws are used, as they would loosen in that direction. Therefore, left screws are employed. Additionally, our left screw taps are available not only in standard types "HT LH," "SP LH," and "PO LH," but also through custom manufacturing. 【Features】 ■ There are three standard types in the left screw tap series: Hand tap for left screws "HT LH" Spiral tap for left screws "SP LH" Point tap for left screws "PO LH" ■ Left screws tighten counterclockwise ■ When the motor shaft rotates clockwise, counterclockwise force is applied to the cap ■ When counterclockwise force is applied to the cap, there is a risk that the blades may fall off if right screws are used, which is why left screws are utilized. *For more details, please refer to the link below or feel free to contact us.

  • 左ねじ用HTLH_バナー_納品データ.png
  • Tap

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Understanding with Manga! "Hand Tap HT MST for Microscope Objective Lenses" Edition

Understanding with Manga! "Hand Tap HT MST for Microscope Objective Lenses" Edition

Ideal for processing microscope objective screws! Manga materials are being distributed.

The hand tap "HT MST" for microscope objective lenses is a tap for through holes that can also be used for hand-threading and reworking from a machining center. It features a RMS type Whitworth thread as specified in JIS B 7141 "Microscope - Objective Screw." Since it is a standard product (catalog item), we can provide it smoothly. 【Specifications】 ■ Tapping speed: up to 10m/min (work material: brass) ■ Internal thread diameter (reference values for screw hole diameter) Nominal 20.32W36: Max. 19.550mm, Min. 19.474mm (19.53mm) Nominal 26W36: Max. 25.300mm, Min. 25.200mm (25.28mm) ■ Other standards include M25 type (M25×0.75), M27 type (M27×0.75), and M32 type (M32×0.75). These can be handled with "HT." We have easy-to-understand manga materials that explain the features. Please check the link below. You can also view product leaflets from related catalogs.

  • Tap

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Troubleshooting Tips: Cutting Taps Edition (3)

Troubleshooting Tips: Cutting Taps Edition (3)

Consultation and answers regarding "cutting taps" and a detailed explanation about magnesium alloys!

This document introduces consultations and responses related to "cutting taps." It includes the short chamfer hand tap "MG-HT" for magnesium alloy castings, as well as one-point advice on magnesium alloys. Please make use of this document. 【Published Examples】 ■Consultation ■Response ■Explanation 　・Short chamfer hand tap "MG-HT" for magnesium alloy castings 　・One-point advice *For more details, please refer to the PDF document at the link below.

  • Tap

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Hand taps for cast iron and die casting 'FC-HT/LA-HT'

Hand taps for cast iron and die casting 'FC-HT/LA-HT'

Reviewing precision, number of grooves, specifications, etc., enables further stable processing!

The "FC-HT/LA-HT" is a hand tap for cast iron and die casting that changes the conventional tap screw grade to Yamawa P-grade precision, setting it to an optimal screw grade. We have rechecked the number of flutes and specifications for each dimension, and for some products, we have also reviewed the number of flutes, which has reduced cutting torque and blade edge damage, enabling more stable processing. 【Features】 ■ Changed the conventional tap screw grade to Yamawa P-grade precision, setting it to an optimal screw grade ■ Reduced torque and thrust ■ Less blade wear ■ Enables more stable processing *For more details, please refer to the PDF document or feel free to contact us.

  • 2019-03-11_14h53_14.png
  • Tap

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Knowledge bag for when you're in trouble: The difference between Unify and Wit

Knowledge bag for when you're in trouble: The difference between Unify and Wit

Common questions and concerns about screws resolved! Screw standards edition.

YAMAWA will respond to the inquiries received from customers. This document also includes detailed explanations. [Contents] ■Inquiry I was asked for a middle tap with "11 threads at 5/8" for a hand tap. Can you understand this from just that? *For more details, please refer to the PDF document linked below.

  • Tap

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Metric Screw Hand Tap

Metric Screw Hand Tap

Manufactured to JIS standards! Ideal for small lot processing and maintenance, millimeter screw hand taps.

The "Mini Screw Hand Tap" is a product of Hayasaka Precision Industry Co., Ltd., which handles the manufacturing of production machinery tools and machine tools. This product is the most common type of tap, suitable for small lot processing and maintenance, and is manufactured according to JIS standards. We offer a wide variety, so please feel free to contact us. 【Specifications】 ■ Thread type: Start (#1) - 9 threads, Middle (#2) - 5 threads, End (#3) - 1.5 threads ■ Material: HSSE and SKS2 *For more details, please refer to the catalog or feel free to contact us.

  • Tap

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.